High-Fidelity Ceiling Speaker

HFCS1

•	Installs  into a variety of ceiling environments including suspended and  hard surface ceilings
•	Large  heavy-gauge plated steel back can for deep bass  response
•	Computer-matched  dual venting system for full bass output
•	Wide  dispersion coaxial driver provides broad, even  coverage
•	Good  off-axis response with smooth contouring
•	For  16-ohm, 70V, & 100V systems
•	Off-white  finish
•	Complies  with UL-2043 - Report  available

High-Fidelity Ceiling Speaker
reduced  back can depth

HFCS1LP

•	6-3/4"  mounting depth for installations into a variety of ceiling  environments including suspended and hard surface  ceilings
•	Low-profile  housing allows greater range of installation  depths
•	Computer-matched  venting system for full bass output
•	Wide  dispersion coaxial driver provides broad, even  coverage
•	For  16-ohm, 70V, & 100V systems
•	Off-white  finish
•	Complies  with UL-2043 - Report  available

In-Ceiling Subwoofer

CSUB

•	8"  Woofer provides superior bass reproduction
•	Installs  in suspended ceilings or drywall
•	Frequency  response: 40 Hz - 125 Hz
•	Heavy-gauge  steel back can
•	For  8-ohm and 70V systems
•	Off-white  finish

High-Fidelity, Small-Footprint Ceiling Speaker

HFSF1

•	Superior  sound in a very compact enclosure (7-1/4"  diameter)
•	Wide-dispersion  coaxial driver for broad, even coverage; superb off-axis  response
•	Only  6-1/4" diameter ceiling opening required
•	Installs  in a wide range of ceiling types
•	For  70V and low-impedance systems
•	Off-white  paintable finish

Drop-In  Ceiling Speaker
with  back can

CSD1X2/U

•	Easy  assembly saves installation time, effort, and  cost
•	1'  x 2' perforated grille over entire front; off-white or bright  white finish
•	8"  cone speaker with 10 oz. magnet and tweeter, and 25/70V  transformer
•	5  power taps (4W, 2W, 1W, 1/2W, & 1/4W); selectable by  rotary switch
•	Tile  support rail (included)
•	Complies  with NFPA National Code 160b and UL-2043 - Report  available

Drop-In  Ceiling Speaker
with  back can

CSD2X2/U

•	Easy  assembly saves installation time, effort, and  cost
•	Tile  support rail for 2' x 4' ceilings included
•	2'  x 2' perforated grille over entire front; off-white or bright  white finish
•	8"  cone speaker with 10 oz. magnet and tweeter, and 25/70V  transformer
•	5  power taps (4W, 2W, 1W, 1/2W, & 1/4W); selectable by  rotary switch
•	Complies  with NFPA National Code 160b and UL-2043 - Report  available

Drop-In  Ceiling Speaker
with  back can and recessed volume control

CSD1X2VR/U

•	Recessed  volume control accessible from front of grille
•	Easy  assembly saves installation time, effort, and  cost
•	1'  x 2' perforated grille over entire front; off-white or bright  white finish
•	8"  cone speaker with 10 oz. magnet and tweeter, and 25/70V  transformer
•	5  power taps (4W, 2W, 1W, 1/2W, & 1/4W); selectable by  rotary switch
•	Complies  with NFPA National Code 160b and UL-2043 - Report  available

Drop-In  Ceiling Speaker
with  back can and recessed volume control

CSD2X2VR/U

•	Recessed  volume control accessible from front of grille
•	Easy  assembly saves installation time, effort, and  cost
•	Tile  support rail for 2' x 4' ceilings included
•	2'  x 2' perforated grille over entire front; off-white or bright  white finish
•	8"  cone speaker with 10 oz. magnet and tweeter, and 25/70V  transformer
•	5  power taps (4W, 2W, 1W, 1/2W, & 1/4W); selectable by  rotary switch
•	Complies  with NFPA National Code 160b and UL-2043 - Report  available

Drop-In  Ceiling Speaker
low  impedance with back can

CSD2X2L/U

•	Easy  assembly saves installation time, effort, and  cost
•	8-ohm,  low impedance
•	15W  maximum power
•	Tile  support rail for 2' x 4' ceilings included
•	2'  x 2' perforated grille over entire front; off-white or bright  white finish
•	8"  cone speaker with 10 oz. magnet and tweeter
•	Complies  with NFPA National Code 160b and UL-2043 - Report  available

Drop-In  Ceiling Speaker
exposed  driver without back can

CSD1X2NB/U

•	Exposed  driver
•	Easy  assembly saves installation time, effort, and  cost
•	1'  x 2' perforated grille over entire front; off-white or bright  white finish
•	8"  cone speaker with 6 oz. magnet and tweeter, and 25/70V  transformer
•	6  power taps (4W, 2W, 1W, 1/2W, 1/4W & 1/8W); selectable by  stripped and tinned leads

Drop-In  Ceiling Speaker
exposed  driver without back can; with recessed volume control

CSD1X2NBVR/U

•	Exposed  driver
•	Recessed  volume control accessible from front of grille
•	Easy  assembly saves installation time, effort, and  cost
•	1'  x 2' perforated grille over entire front; off-white or bright  white finish
•	8"  cone speaker with 6 oz. magnet and tweeter, and 25/70V  transformer
•	6  power taps (4W, 2W, 1W, 1/2W, 1/4W & 1/8W); selectable by  stripped and tinned  leads

Ceiling  Speakers

S86T725PG8U/W & S810T725PG8U/W  Assemblies

•	4W  capacity
•	8"  cone speaker for excellent audio quality
•	6  power taps available (4W, 2W, 1W, 1/2W, 1/4W,  1/8W)
•	Available  with recessed or knob volume control
•	Pre-assembled  for faster installation
•	Off-white  or bright white enamel over steel grille
•	For  70V & 25V systems

Surface-Mount  Speakers
Easy  Install®/Easy Design Speakers

SM1EZ,  SM4T

•	Fast,  easy, clean installation
•	Direct  and reflected sound paths create wide dispersion  angle
•	Lightweight  and durable plastic shell with a paintable off-white  finish
•	Complies  with NFPA National Code 160b and UL-2043 - Report  available
•	For  25V and 70V systems

Ceiling  Speakers
Easy  Design Speakers

CS1EZ

•	1W,  single-tap design
•	Screw  terminal connections for fast installation
•	For  70V systems
•	Pre-assembled  with 8" cone speaker
•	Heavy-duty,  wire-wound volume control with knob
•	Off-white  enamel over steel grille

Metal  Box Speakers

MB8TSQ  & MB8TSL

•	Rugged  all-steel surface-mounted enclosure; off-white  finish
•	Full  range 8" cone speaker for excellent  intelligibility
•	Compatible  with 25V or 70V amplifier systems
•	Multiple  taps at 4W, 2W, 1W, 1/2W, 1/4W, & 1/8W
•	4-watt  maximum power output
•	Available  as flat-fronted (MB8TSQ) or with 12.5° angled front  (MB8TSL)

Metal  Box Speakers
with  recessed volume control

MB8TSQVR  & MB8TSLVR

•	Recessed  volume control
•	Rugged  all-steel surface-mounted enclosure; off-white  finish
•	Full  range 8" cone speaker for excellent  intelligibility
•	Compatible  with 25V or 70V amplifier systems
•	Multiple  taps at 4W, 2W, 1W, 1/2W, 1/4W, & 1/8W
•	Available  as flat-fronted (MB8TSQVR) or with 12.5° angled front  (MB8TSLVR)

Wall  Baffle Speakers

WBS8T725 Assemblies,
&  WBS810T725

•	4W  capacity
•	8"  cone speaker for excellent audio quality
•	6  power taps available (4W, 2W, 1W, 1/2W, 1/4W,  1/8W)
•	Simulated  walnut finish
•	Available  with volume control ("V" versions)
•	Pre-assembled  for faster installation
•	Works  with both 70V and 25V amplifier  outputs

Wall  Baffle Speakers
Easy  Design Speakers

WB1EZ

•	1W,  single-tap design
•	Screw  terminal connections for fast installation
•	For  70V systems
•	Pre-assembled  with 8" cone speaker
•	Recessed  volume control
•	Simulated  walnut finish