|
|
Wall Mount Enclosures
|
|
Wall-mount Enclosures (WAC Series)
Fiber-Conn's wall-mount patch enclosures are designed for direct termination of up to 96 fibers. The WAC series accommodates up to 8 modular panels and is equipped with routing guides to limit bend radius and enhance strain-relief control. The 16-gauge steel with corrosion-resistant black powder finish coat housing provides excellent protection for the inside fibers. Wall-mount available unloaded, as well as having the capability to become a full-splice enclosure with mechanical terminations. A large variety of connector adapters are offered to meet your specific requirements.
Features and Benefits
- Three sizes available with up to 8 adapter panel capacity
- 16-gauge steel with corrosion-resistant black powder finish coat
- Swing-down door with cable strand for more work space
- Grommets at the top and bottom
- Strain-relief hardware and routing guides help maintain minimum bend radius.
- Available unloaded or fully loaded with capability of mechanical termination
- Zip ties and installation screws included
- Competitive pricing and prompt delivery
|
|
Product Specifications
|
|
|
Part No. WAC-1X
Dimensions: Width = 6.5'', Depth = 1.5'', Height = 7''
Weight (unloaded): 2.1 lbs.
Features: Wall-mount enclosure accommodates 1 adapter panel (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with small pad lock. Entry point at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment. *The WAC-1X does not support splice trays.
Lead time: In Stock, Immediate Shipment
View PDF
|
|
|
Part No. WAC-2X
Dimensions: Width = 13'', Depth = 3.6'', Height = 9.2''
Weight (unloaded): 6.85 lbs.
Features: Wall-mount enclosure accommodates 2 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment
View PDF
|
|
|
Part No. WAC-4X
Dimensions: Width = 13'', Depth = 3.5'', Height = 11.5''
Weight (unloaded): 7.95 lbs.
Features: Wall-mount enclosure accommodates 4 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment
View PDF
|
|
|
Part No. WAC-8X
Dimensions: Width = 17'', 12.2''
Weight: 12.7 lbs.
Features: Wall-mount enclosure accepts 8 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without allowing any unwanted handling of fiber optic cables. Side swing doors allow user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment
View PDF
|
|
|
Part No. WAC-12X
Dimensions: Width=17.75", Depth = 5.87'', Height = 16.75"
Features: Wall-mount enclosure accepts 12 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall mount is lockable with a 1'' keyed barrel lock.
Lead time: In Stock, Immediate Shipment
View PDF
|
|
|
